Have you ever wondered why your washing machine suddenly stops working, leaks water, or refuses to spin right when you need it the most? Automatic washers make life easier, but like all appliances, they eventually need expert care and maintenance.

Whether it’s a minor drainage issue or a major motor fault, timely automatic washing machine repair can save you from expensive replacements and endless laundry troubles.

At Pak Repair Point, we’ve seen every type of washer issue imaginable, and most of them start with small, common faults that can be fixed early. Here are the seven most common automatic washing machine problems and how you can fix them before they become serious.

Washing Machine Not Spinning or Draining

This is one of the most frequent complaints homeowners face. When your washer refuses to spin or drain, it can leave clothes soaked and heavy.

Possible Causes:

• Faulty lid or door switch
• Clogged drain hose or filter
• Unbalanced load

Quick Fix:

Start by checking whether the lid is closing properly. A damaged door switch prevents the spin cycle from starting. Next, inspect the drain hose sometimes lint or coins can block it. Rebalance the load inside the drum to ensure even distribution.

When to Call a Technician:

If your machine still won’t spin or drain after these checks, the issue could be with the motor or PCB board. That’s when Pak Repair Point’s experts step in with diagnostic tools to locate and repair the fault quickly.

2. Water Leakage Around the Machine

Finding a puddle of water under your machine is not only inconvenient but also risky for your floor and electrical safety.

Possible Causes:

• Loose or damaged water inlet hose
• Cracked drain pipe
• Worn-out door gasket or pump seal

Quick Fix:

Tighten the inlet and outlet hoses to make sure they’re securely connected. Check the rubber gasket around the door for cracks. Small leaks can often be fixed at home, but continuous leakage means the pump or seal may need replacement.

Professional Help:

Technicians from Pak Repair Point can replace gaskets, hoses, and damaged components using genuine parts, ensuring the leak doesn’t return.

3. Loud or Banging Noises During Spin Cycle

If your automatic washing machine sounds like it’s about to take off during the spin cycle, something isn’t right.

Possible Causes:

• Unbalanced drum or overloaded load
• Foreign objects trapped between drum and tub
• Worn bearings or shock absorbers

Quick Fix:

Stop the cycle, redistribute the clothes evenly, and restart. Check for coins, buttons, or small items stuck in the drum holes.

When to Call an Expert:

If the noise continues, you might be dealing with bearing or suspension wear. Pak Repair Point technicians can replace these components, restoring smooth, quiet operation.

4. Washing Machine Not Starting

A completely unresponsive washer can make anyone panic, but don’t worry it’s often an easy fix.

Possible Causes:

• Power supply issue
• Faulty plug, fuse, or circuit breaker
• Defective door interlock switch

Quick Fix:

Confirm that the outlet is working by testing another appliance. Check the fuse in your plug and ensure the power cord isn’t damaged. Sometimes, the issue lies in the control panel or wiring, which should only be handled by a qualified technician.

When to Call a Technician:

If you’ve tried all these and still face the same problem, the control board or timer circuit may need attention. Pak Repair Point can handle all electrical repairs safely and efficiently.

5. Water Not Filling or Overfilling the Drum

Is your washer refusing to fill, or is it taking in too much water? Both are signs of a water inlet issue.

Possible Causes:

• Blocked inlet filter mesh
• Faulty inlet valve or pressure switch
• Weak water supply pressure

Quick Fix:

Remove the water hose and clean the inlet filter a small mesh screen that often traps dirt or sand particles. Ensure the water supply valve is fully open.

When to Call for Service:

If water flow doesn’t normalize, the inlet valve or pressure sensor might be faulty. Pak Repair Point can replace these parts promptly to restore proper water control.

6. Foul Smell Coming from the Drum

A musty or unpleasant smell is a clear sign your washing machine needs cleaning.

Possible Causes:

• Detergent residue buildup
• Mold or bacteria inside drum and gasket
• Using too much liquid detergent or cold cycles

Quick Fix:

Run an empty hot wash with vinegar and baking soda to disinfect the drum. Clean the detergent drawer and rubber seal regularly. Always leave the door slightly open after each use to let moisture escape.

Maintenance Tip:

Perform this cleaning routine monthly to keep your washer hygienic and fresh.

7. Error Codes Flashing on the Display

Modern automatic washers often display error codes to alert you of specific faults but most homeowners aren’t sure what they mean.

Common Examples:

• E1/E2: Drain or water inlet issue
• E3: Door lock problem
• E5/E6: Temperature or motor sensor error

Quick Fix:

Turn off the machine, unplug it for 10 minutes, and restart. Sometimes this resets the system. If the same code reappears, don’t attempt to open internal panels it may require specialized diagnostic tools.

Professional Help:

Pak Repair Point’s technicians use error code analyzers to pinpoint the fault, saving you time and preventing further damage.

Preventive Tips to Avoid Frequent Repairs

You can minimize washing machine issues with a few simple habits:

• Don’t overload the drum it strains the motor and bearings.
• Use only recommended detergent types and quantities.
• Wipe moisture off the door and rubber gasket after each use.
• Clean the drain pump filter monthly.
• Schedule a full service every six months with a professional technician.

These steps not only prevent breakdowns but also extend your machine’s lifespan.

When to Call Pak Repair Point

Even the best washing machines need expert attention occasionally. Pak Repair Point offers automatic washing machine repair in Islamabad and Rawalpindi, covering all major brands like LG, Samsung, Haier, Dawlance, and Whirlpool.

Our trained technicians handle everything from motor faults and drainage problems to PCB and wiring repairs, all with original spare parts and warranty-backed service. Whether it’s a minor leak or a major mechanical issue, we provide quick, reliable solutions at your doorstep.

Why Choose Pak Repair Point:

• Same-day home service
• Experienced and verified technicians
• Affordable, transparent pricing
• Genuine replacement parts
• Warranty on every repair

Call or WhatsApp us anytime we’re here to make your laundry routine hassle-free.

Conclusion:

Ignoring small washing machine problems can lead to bigger, costlier issues later. A leaking hose or a strange noise might not seem serious now, but over time, it can damage the motor or drum. If your washer isn’t working as it should, don’t wait.

Book a quick inspection with Pak Repair Point today and let our experts restore your washing machine’s performance quickly, safely, and affordably.